For DJs, sound quality is paramount, and the ATI-15000 DJ Amplifier stands out as a pinnacle of performance and reliability. This beast of an amplifier, boasting an astounding 9000 watts of power, is engineered to deliver the best audio experience for both intimate gigs and massive events.

Unmatched Power and Versatility
The ATI-15000 offers an incredible range of power outputs to suit different needs:

• 8Ω Stereo Power: 4 x 1500W
• 4Ω Stereo Power: 4 x 2250W
• 2Ω Stereo Power: 4 x 3000W
• 8Ω Bridge Mono Power: 2 x 4000W
• 4Ω Bridge Mono Power: 2 x 6000W

This flexibility ensures that whether you’re driving a small setup or a complex, large-scale system, the ATI-15000 can handle it with ease.

Exceptional Sound Quality
With a frequency response of 20Hz to 20KHz (+/- 0.5dB), the ATI-15000 ensures that every note and beat is reproduced with pristine clarity. The Total Harmonic Distortion (THD+N) is kept below 0.5%, even at 1/3 power output at 8Ω, guaranteeing minimal distortion and crystal-clear sound.

Advanced Features for Superior Performance
The ATI-15000 is packed with features that set it apart from the competition:

• Slew Rate: >105SV/us, allowing for rapid response to audio signals.
• Signal Noise Ratio: 110dB, ensuring a quiet and clean signal path.
• Damping Factor: >2000 at 8Ω and 1KHz, providing tight control over speaker motion for accurate sound reproduction.

Connectivity and Build Quality
This amplifier is designed with the professional DJ in mind, featuring:

• Input Connectors: 3-pin XLR, electrically balanced for each channel.
• Link Connectors: XLR, 3-pin male, allowing for easy system integration.
• Output Circuit: Class TD, known for its efficiency and reliability.
• Input Impedance: 20KΩ balanced, 10KΩ unbalanced.
• Output Sockets: Speakon connectors for secure and efficient speaker connections.

Robust Protection and Reliability
The ATI-15000 is built to withstand the rigors of professional use. It includes comprehensive protection mechanisms such as short circuit, open circuit, overheat, overload, DC, and supersonic frequency protection. This ensures that the amplifier remains safe and operational even under the most demanding conditions.

Built to Last
Weighing in at 36.5kgs (net weight) and housed in a robust chassis with dimensions of 73.7 x 55.2 x 23.5 cm, the ATI-15000 is built for durability. Its solid construction ensures it can withstand the wear and tear of frequent transportation and heavy use.

Conclusion
The ATI-15000 DJ Amplifier is more than just an amplifier; it’s a powerhouse that brings unparalleled sound quality and reliability to your DJ setup. Whether you’re performing at a small club or a large outdoor festival, the ATI-15000 has the power and precision to ensure your sound is nothing short of spectacular. Elevate your performance with the ATI-15000 and experience the true potential of your sound system.

When it comes to delivering powerful, clear, and reliable sound, the ATI 12+ DJ Amplifier stands in a league of its own. This high-performance amplifier is designed to meet the demands of professional DJs and audio enthusiasts who require exceptional sound quality and robust performance. With a power rating of 2550 watts, the ATI 12+ is engineered to handle the most challenging audio environments with ease.

Key Features and Specifications
Model Name: ATI 12+
Power Ratings:

• 8Ω Stereo Power: 2x900W
• 4Ω Stereo Power: 2x1275W
• 2Ω Stereo Power: 2x1700W
• 8Ω Bridge Mono Power: 2550W
• 4Ω Bridge Mono Power: 3400W

The ATI 12+ offers a variety of power configurations, ensuring versatility and adaptability for different setups and venues. Whether you need powerful stereo output or high-output bridged mono performance, this amplifier has you covered.

Signal-to-Noise Ratio (SNR): >80dB
Total Harmonic Distortion (THD+N): <0.05% (8Ω, 1kHz, 1/4 output)
Damping Factor: >1500 (8Ω, 1kHz)
Slew Rate: >20V/us
These specifications highlight the amplifier’s ability to deliver clean and precise audio, with minimal distortion and impressive control over speaker movement. The high damping factor ensures tight and accurate bass response, making it ideal for genres that demand powerful low-end performance.
Input Sensitivity: 0.775V/1.0V/1.4V
Output Circuit: Class H
Frequency Response: 20Hz-20kHz ±0.5dB
The Class H output circuit provides efficient power management, reducing heat output and ensuring long-term reliability. The wide frequency response guarantees that every nuance of your music is faithfully reproduced, from deep bass to shimmering highs.
Input Connectors (per channel): 3-pin XLR, electronically balanced
Link Connectors (per channel): XLR, 3-pin male
Input Impedance: 20kΩ balanced, 10kΩ unbalanced
Output Connectors: Neutrik
The ATI 12+ is equipped with professional-grade connectors to ensure secure and reliable connections. The balanced inputs minimize noise and interference, maintaining the integrity of your audio signal.
Protection Features: Short circuit, open circuit, overheat, overload, DC, and supersonic frequency protection.
Robust protection features safeguard the amplifier and connected equipment, providing peace of mind during demanding performances.
Dimensions and Weight:

• Transport Dimension: 3U, 67.5 x 57 x 22.5 cm
• Net Weight: 35 kg
• Gross Weight: 37 kg

Unmatched Performance and Reliability
The ATI 12+ DJ Amplifier is more than just power; it’s about delivering exceptional sound quality and reliability. Whether you’re rocking a club, powering a live event, or setting up a professional sound system, this amplifier ensures your audio is delivered with precision and clarity.

Conclusion
In the world of professional audio, the ATI 12+ DJ Amplifier is a powerhouse that stands out. With its impressive power ratings, advanced circuitry, and comprehensive protection features, it is an ideal choice for DJs and audio professionals who demand the best. Elevate your sound with the ATI 12+ and experience the difference that 2550 watts of pure performance can make.

When it comes to delivering unmatched power and precision in the world of DJing, the DJ Amplifier ATI 9+ stands out as a remarkable choice. This amplifier is designed to meet the rigorous demands of professional DJs and sound engineers, ensuring that every performance is both powerful and crystal clear. Let’s dive into the features and specifications that make the ATI 9+ a must-have for any serious DJ.

Power and Performance
The ATI 9+ boasts an impressive array of power output options that cater to various setups and requirements. Whether you’re driving a pair of speakers or bridging for a more powerful mono output, this amplifier has you covered:

• 8Ω Stereo Power: 800W x 2
• 4Ω Stereo Power: 1200W x 2
• 2Ω Stereo Power: 1800W x 2
• 8Ω Bridge Mono Power: 2400W
• 4Ω Bridge Mono Power: 3600W

These specifications ensure that the ATI 9+ can handle a wide range of speaker configurations, providing flexibility and reliability for any event.

Audio Quality
Delivering exceptional audio quality is where the ATI 9+ truly shines. With a frequency response of 20Hz to 20kHz, this amplifier ensures that every nuance of your music is accurately reproduced. The signal-to-noise ratio (SNR) is greater than 80dB, meaning that the amplifier maintains clarity and minimizes unwanted noise, even at high volumes.

The Total Harmonic Distortion plus Noise (THD+N) is less than 0.05% at 1kHz and 1/4 output, highlighting the amplifier’s ability to provide clean and precise sound. Additionally, the damping factor is greater than 600, ensuring tight and controlled bass response.

Slew Rate and Sensitivity
The slew rate of the ATI 9+ is greater than 20V/us, allowing the amplifier to respond quickly to changes in the input signal. This results in a more dynamic and accurate sound reproduction. The input sensitivity options of 0.775V, 1.0V, and 1.4V provide flexibility in matching the amplifier to different input sources and setups.

Connectivity and Compatibility
The ATI 9+ features a robust set of input and link connectors to ensure seamless integration with your existing audio equipment:

• Input Connectors (per channel): 3-pin XLR, electronically balanced
• Link Connectors (per channel): XLR, 3-pin male

These connectors offer reliable and high-quality signal transmission, making the ATI 9+ compatible with a wide range of professional audio gear. The input impedance is 20kΩ balanced and 10kΩ unbalanced, providing further flexibility in connecting different sources.

Protection and Reliability
Reliability is paramount in any professional audio setup, and the ATI 9+ is designed with comprehensive protection features to safeguard your investment. This amplifier includes protection against short circuits, open circuits, overheating, overloads, and DC faults. These safeguards ensure that the ATI 9+ can withstand the rigors of live performances and continuous use, providing peace of mind for DJs and sound engineers.

Class AB Output Topology
The ATI 9+ employs Class AB output topology, striking a balance between the efficiency of Class B and the linearity of Class A amplifiers. This design choice ensures that the amplifier delivers high-quality audio with reduced distortion and excellent efficiency.

Conclusion
The DJ Amplifier 2400 Watt Model ATI 9+ is a powerhouse designed for those who demand the best in audio performance and reliability. Its versatile power output options, exceptional audio quality, robust connectivity, and comprehensive protection features make it an ideal choice for professional DJs and sound engineers. Whether you’re powering a club sound system or a mobile DJ setup, the ATI 9+ delivers the performance and dependability you need to elevate your sound to the next level.

When it comes to delivering an exceptional auditory experience, the right equipment makes all the difference. Enter the ATI 6+ DJ Amplifier, a powerhouse designed to elevate your sound game. Whether you’re a professional DJ or an audio enthusiast, this 2000-watt amplifier offers the perfect blend of power, clarity, and reliability to ensure your performances leave a lasting impression.

Unmatched Power and Performance
The ATI 6+ is engineered to deliver robust power, ensuring your sound is both impactful and clear. With an impressive array of power ratings, it caters to diverse audio needs:

• 8Ω Stereo Power: 600W x 2
• 4Ω Stereo Power: 1000W x 2
• 2Ω Stereo Power: 1600W x 2
• 8Ω Bridge Mono Power: 2000W
• 4Ω Bridge Mono Power: 3200W

Superior Sound Quality
The ATI 6+ isn’t just about power; it’s about delivering that power with pristine clarity. Its frequency response range of 20Hz to 20kHz ensures every nuance of your music is accurately reproduced. The amplifier boasts a signal-to-noise ratio of over 80dB, minimizing background noise and maximizing audio fidelity. With a THD+N (Total Harmonic Distortion plus Noise) of less than 0.05% at 8 ohms and 1kHz at a quarter output, the ATI 6+ guarantees distortion-free sound reproduction.

Advanced Design and Connectivity
The ATI 6+ features a Class AB output topology, known for its efficiency and high-quality audio output. This design choice ensures that the amplifier not only sounds great but also runs efficiently. Connectivity is versatile with 3-pin XLR input connectors that are electronically balanced, and link connectors (XLR, 3-pin male) for seamless integration into your existing setup. The input impedance is 20kΩ balanced and 10kΩ unbalanced, providing flexibility for various input sources.

Built for Durability and Protection
Reliability is paramount, and the ATI 6+ is built to withstand the demands of any performance environment. It includes comprehensive protection mechanisms against short circuits, open circuits, overheating, overloads, and DC faults. This ensures that your amplifier remains safe and operational under any circumstances.

Enhanced Control and Precision
To match your specific audio requirements, the ATI 6+ offers selectable input sensitivity (0.775V/1.0V/1.4V) and a damping factor of over 600 (8 Ohms, 1kHz). This high damping factor allows for better control over speaker movement, resulting in tighter and more accurate bass response. The slew rate of over 20V/µs ensures rapid response to audio signal changes, maintaining the integrity of your sound.

Conclusion
The ATI 6+ DJ Amplifier stands out as a versatile, powerful, and reliable piece of audio equipment. Its blend of high power, superior sound quality, and advanced protection features makes it an ideal choice for any DJ or audio professional seeking to deliver an outstanding auditory experience. Whether you’re powering a small venue or a large event, the ATI 6+ is your go-to amplifier for consistent and exceptional performance.

In the realm of professional audio amplification, precision, power, and reliability are paramount. The ATI HD-1601 Amplifier stands as a testament to these qualities, offering a robust solution for audio professionals seeking unparalleled performance. This blog delves into the specifications and features that make the HD-1601 a standout choice for discerning audio enthusiasts and professionals alike.

Unmatched Power Output
At the heart of the ATI HD-1601 lies its impressive power output capabilities. This amplifier boasts a range of power ratings, ensuring it can meet the demands of various audio setups. With power outputs of 2x1700W, 2x2250W, and 2x2700W, the HD-1601 is designed to deliver consistent and powerful audio performance. Furthermore, its bridging capabilities extend to a remarkable 4200W and 5200W, making it suitable for large-scale events and installations where high power and clarity are essential.

Superior Audio Quality
The HD-1601 is engineered to deliver exceptional audio quality across a wide frequency range. Operating from 20Hz to 20kHz with a -3dB point at 150kHz, this amplifier ensures that every nuance of your audio is faithfully reproduced. The total harmonic distortion (THD) is kept below 0.1%, guaranteeing clean and clear sound even at high output levels. Additionally, with a damping factor greater than 800, the HD-1601 provides a tight and controlled bass response, enhancing the overall listening experience.

Precision and Control
Control and precision are at the forefront of the HD-1601’s design. The input sensitivity is rated at 0.775V, and the input impedance exceeds 20kΩ, ensuring compatibility with a wide range of audio sources. The balanced 3-Pin XLR inputs and XLR 3-Pin Male outputs facilitate seamless integration into any professional audio system, providing flexibility and ease of use.

Robust Build and Cooling
Reliability is a key feature of the ATI HD-1601. The amplifier is housed in a sturdy 3U chassis measuring 67.5 x 57 x 19 cm, and weighs in at 35 kgs. The robust construction ensures durability, making it ideal for both touring and fixed installations. The HD-1601 also features advanced cooling mechanisms, including two rear-panel variable speed DC fans with filters that can be easily detached without tools. This ensures optimal performance even in demanding environments, preventing overheating and maintaining consistent operation.

Advanced Protection and Indicators
The ATI HD-1601 is equipped with comprehensive protection features and indicators to safeguard your audio system. These include Clip/Limit, Signal, Temperature/DC, and Active indicators, providing real-time monitoring and protection. These features ensure that the amplifier operates within safe parameters, protecting both the amplifier and connected speakers from potential damage.

Conclusion
The ATI HD-1601 Amplifier is a powerhouse of performance, designed to meet the rigorous demands of professional audio applications. Its impressive power output, superior audio quality, precise control, robust build, and advanced protection features make it a reliable choice for audio professionals. Whether for large-scale live events, studio installations, or fixed sound systems, the HD-1601 delivers exceptional performance and reliability, ensuring your audio is always at its best.

In the realm of professional audio amplification, the ATI HD1201 stands tall as a powerhouse designed to meet the rigorous demands of large-scale sound reinforcement systems. Whether you’re powering a concert venue, a large auditorium, or a club environment, the HD1201 delivers robust performance and reliability.

Power Output:

• Stereo Configuration:
• 8Ω: 2x1350W
• 4Ω: 2x1850W
• 2Ω: 2x2150W
• Bridge Mono Configuration:
• 8Ω: 3700W
• 4Ω: 4800W

The ATI HD1201 boasts impressive power ratings across different impedance levels, ensuring ample headroom for delivering clean and dynamic audio.
Maximum Peak Output Power:

• 132v peak output ensures transient peaks are handled with authority, maintaining clarity and fidelity even during demanding passages.

Audio Quality
Frequency Response:

• Covers the full audio spectrum from 20Hz to 20kHz with a slight roll-off at -3dB at 150kHz, ensuring clarity across the entire audible range.

THD+N (Total Harmonic Distortion + Noise):

• Less than 0.1% THD+N at 8Ω, 1kHz, and 1/4 rated output ensures pristine audio reproduction without introducing unwanted artifacts.

Damping Factor:

• A damping factor greater than 800 ensures tight control over speaker movement, enhancing bass response and overall transient performance.

Design and Connectivity
Input and Output:

• Input Connectors: 3-pin XLR, electronically balanced, offering secure connections for reliable signal transfer.
• Link Connectors: XLR, 3-pin male connectors facilitate easy daisy-chaining of multiple amplifiers.

Cooling and Build Quality:

• Cooling System: Two rear-panel variable-speed DC fans and detachable filters ensure efficient cooling without excessive noise, suitable for prolonged operation in demanding environments.
• Construction: Robust build with a net weight of 38kg and a gross weight of 40kg, indicating a sturdy chassis designed to withstand the rigors of professional use.

User Interface and Monitoring
LED Indicators:

• Clip/Limit, Signal, Temp/DC, and Active indicators per channel provide visual feedback on amplifier status, allowing for quick diagnostics and monitoring during operation.

Conclusion
The ATI HD1201 amplifier combines high power output with advanced features and robust construction, making it an ideal choice for sound professionals seeking uncompromising performance in live sound reinforcement, installations, and other demanding applications. With its precise audio reproduction, efficient cooling system, and comprehensive monitoring capabilities, the HD1201 ensures that audio signals are amplified faithfully and reliably, meeting the needs of even the most discerning audio engineers and performers.

The ATI HD 801 amplifier stands as a pinnacle of power and precision in the realm of professional audio equipment. Engineered to deliver exceptional performance across various applications, from live sound reinforcement to studio monitoring, the HD 801 promises to elevate your audio experience with its robust features and impressive specifications.

Power and Performance
The HD 801 boasts impressive power capabilities across different impedance levels:

• 8 Ω Stereo Power: 2x1050W
• 4 Ω Stereo Power: 2x1550W
• 2 Ω Stereo Power: 2x1600W
• 8 Ω Bridge Mono Power: 3400W
• 4 Ω Bridge Mono Power: 4200W

This versatility ensures that the amplifier can handle a wide range of speaker configurations and power requirements with ease, making it a suitable choice for both large-scale venues and intimate studio setups.
High-Fidelity Audio Quality

Designed for audiophiles and professionals who demand pristine sound quality, the HD 801 offers:

• Frequency Response: 20Hz – 20kHz (-3dB @ 150kHz)
• THD+N (Total Harmonic Distortion + Noise): <0.1% at rated power (4Ω/1kHz)
• Damping Factor: >800

These specifications ensure that the amplifier faithfully reproduces audio signals across the entire frequency spectrum, maintaining clarity and accuracy even at high output levels.

Design and Connectivity
The HD 801 is built for convenience and reliability:

• Class: H (ensuring efficiency and reduced heat dissipation)
• Input Connectors: 3-Pin XLR, Electronically Balanced (per channel)
• Link Connectors: XLR, 3 Pin Male (allowing easy daisy-chaining of multiple amplifiers)
• Cooling System: Two rear panel variable speed DC fans, with filters that are detachable without tools
• LED Indicators: Clip/Limit, Signal, Temp/DC, Active (providing real-time status monitoring)
• Weight: Net 35kg, Gross 37kg (robust yet manageable for transport and installation)

Applications
Whether you’re powering a demanding concert setup, refining your studio monitoring environment, or ensuring crystal-clear sound in a conference hall, the ATI HD 801 excels in all these scenarios. Its combination of power, precision, and reliability makes it a preferred choice among audio professionals worldwide.

Conclusion
In conclusion, the ATI HD 801 amplifier embodies the pinnacle of audio engineering, offering unparalleled power, fidelity, and reliability. Whether you’re a sound engineer, DJ, venue operator, or studio producer, investing in the HD 801 ensures that your audio setup meets the highest standards of performance. Discover the ATI HD 801 and experience the difference it makes in your sound reinforcement and audio playback systems. For more information on the ATI HD 801 amplifier and how it can elevate your audio experience, contact us today or visit our website to explore its full capabilities.

In the world of audio equipment, finding a versatile, high-quality installation amplifier can be challenging. However, the ATI 60U HD+ Amplifier is a game-changer, offering a blend of sleek design, exceptional functionality, and superior sound quality. Whether you’re setting up a professional audio system in a venue, office, or home, the ATIPRO 60U HD+ is the perfect choice.

Sleek Design and Easy Installation
One of the standout features of the ATIPRO 60U HD+ Amplifier is its sleek and modern design. With a 19″ rack mounting, this amplifier is not only stylish but also incredibly easy to install. The design ensures that it seamlessly integrates into any standard audio rack, making it a convenient addition to your existing setup. The compact form factor also means it takes up minimal space, allowing for a clean and organized installation.

Versatile Input Options
The ATIPRO 60U HD+ Amplifier offers a range of input options, making it incredibly versatile. It comes equipped with three microphone inputs and two auxiliary inputs. This flexibility allows you to connect multiple audio sources simultaneously, whether it’s microphones for announcements or music from various devices. The amplifier’s ability to handle multiple inputs makes it ideal for a variety of applications, from presentations to live performances.

Built-In Digital Player
In today’s digital age, having an integrated digital player is a significant advantage. The ATIPRO 60U HD+ Amplifier features a built-in digital player, allowing you to play audio files directly from USB drives or other digital media. This feature is particularly useful for venues or events where pre-recorded audio needs to be played without the hassle of additional equipment.

Superior Sound Quality
Sound quality is paramount when it comes to audio equipment, and the ATIPRO 60U HD+ Amplifier excels in this regard. It offers comprehensive control over bass, mid, and treble frequencies, allowing you to fine-tune the sound to your liking. This level of control ensures that the audio output is balanced and clear, delivering an exceptional listening experience. Whether you’re amplifying speech or music, the ATIPRO 60U HD+ guarantees top-notch sound quality.

Power and Performance
The ATIPRO 60U HD+ Amplifier boasts a power output of 60 watts, with a maximum output of 85 watts. This power range is perfect for small to medium-sized venues, providing ample volume without sacrificing clarity. The amplifier’s robust performance ensures that your audio is delivered with precision and power, making it suitable for a wide range of applications.

Conclusion
In summary, the ATIPRO 60U HD+ Amplifier is a versatile, high-performance installation amplifier that offers a sleek design, multiple input options, a built-in digital player, superior sound quality, and robust power output. Whether you’re setting up an audio system for a venue, office, or home, this amplifier is a reliable and efficient choice. Its combination of features and performance makes it a standout option in the world of audio equipment. Invest in the ATIPRO 60U HD+ Amplifier and experience the difference it can make in your audio setup.

When it comes to professional audio equipment, the ATI 100U HD+ Amplifier stands out as a top-notch choice for both installations and live performances. This sleek, 19″ rack-mountable amplifier is designed to deliver exceptional sound quality and versatile functionality, making it an ideal solution for various audio needs. In this blog, we’ll explore the key features and benefits of the ATIPRO 100U HD+ Amplifier, highlighting why it should be your go-to choice for superior audio amplification.

Sleek and Practical Design
The ATIPRO 100U HD+ Amplifier boasts a sleek design that is both stylish and practical. Measuring 19 inches, it is perfectly suited for rack mounting, ensuring that it can be easily integrated into your existing audio setup. Its compact form factor doesn’t just save space but also adds a touch of modernity to your audio equipment collection. The durable build ensures that the amplifier can withstand the rigors of regular use, whether installed in a professional studio, a commercial space, or a live performance setting.

Multiple Input Options for Versatile Connectivity
One of the standout features of the ATIPRO 100U HD+ Amplifier is its versatile connectivity options. It comes equipped with three microphone inputs and two auxiliary inputs, allowing you to connect a wide range of audio sources. Whether you’re setting up a public address system, hosting a live event, or running a studio session, this amplifier has you covered. The multiple input options ensure that you can easily switch between different audio sources without the need for additional equipment, making your setup more efficient and streamlined.

Integrated Digital Player
In today’s digital age, having an integrated digital player is a significant advantage. The ATIPRO 100U HD+ Amplifier features a built-in digital player, enabling you to play audio files directly from USB drives or SD cards. This feature is particularly useful for events where pre-recorded audio needs to be played seamlessly. The digital player supports various formats, ensuring compatibility with your audio files and providing high-quality playback.

Enhanced Sound Quality Controls
Achieving the perfect sound balance is crucial for any audio setup, and the ATIPRO 100U HD+ Amplifier makes this task effortless. It comes with dedicated bass, mid, and treble controls, allowing you to fine-tune the sound to your liking. Whether you need to enhance the low-end frequencies for a fuller sound or adjust the mid and high frequencies for clarity and brightness, this amplifier provides you with the tools to achieve the ideal sound quality. These controls ensure that your audio output is tailored to suit the specific acoustics of your environment, delivering an immersive listening experience.

Impressive Power Output
Power output is a critical factor when choosing an amplifier, and the ATIPRO 100U HD+ Amplifier doesn’t disappoint. With a power output of 100 watts and a maximum output of 150 watts, this amplifier delivers robust and clear sound, making it suitable for a variety of applications. Whether you’re amplifying music, speech, or any other audio content, you can rely on the ATIPRO 100U HD+ Amplifier to provide consistent and powerful performance.

Conclusion
The ATIPRO 100U HD+ Amplifier is a versatile and reliable choice for anyone seeking a high-quality audio amplification solution. Its sleek 19-inch rack-mountable design, multiple input options, integrated digital player, enhanced sound quality controls, and impressive power output make it an excellent addition to any professional audio setup. Whether you’re an audio engineer, a live event organizer, or someone looking to upgrade their sound system, the ATIPRO 100U HD+ Amplifier is a worthy investment that will elevate your audio experience to new heights.

Regarding delivering unparalleled audio performance, the ATI 10000+ amplifier stands out in professional sound systems. This powerhouse amplifier is a must-have for any serious audio setup and is designed to meet the demands of high-power applications. Let’s delve into the specifications and features that make the ATI 10000+ a top choice for audio professionals.

Exceptional Power Output
The ATI 10000+ amplifier boasts impressive power ratings that ensure your sound system delivers crystal-clear audio at any volume. Here’s a breakdown of its power capabilities:

• 8 Ω Stereo Power: 2×2500 W
• 4 Ω Stereo Power: 2×4500 W
• 2 Ω Stereo Power: 2×5000 W
• 8 Ω Bridge Mono Power: 8000 W
• 4 Ω Bridge Mono Power: 10000 W

With these power levels, the ATI 10000+ is capable of driving large speaker arrays, making it ideal for concerts, large venues, and professional audio installations.

Pristine Sound Quality
The frequency response of the ATI 10000+ amplifier is meticulously crafted to provide high-fidelity audio reproduction. It offers a frequency response of 20 Hz – 20 kHz with a variation of only +/-0.1 dB, ensuring that every nuance of the audio signal is faithfully reproduced. The Total Harmonic Distortion (THD) is kept below 0.08% at 1 kHz and 1/4 output, guaranteeing clean and distortion-free sound.

High Performance and Reliability
One of the standout features of the ATI 10000+ is its robust design, ensuring reliable performance even under the most demanding conditions. The slew rate of >10 SV/Us contributes to its ability to handle rapid transients, providing crisp and accurate sound. With a signal-to-noise ratio exceeding 110 dB, this amplifier ensures minimal background noise, delivering a pure and immersive listening experience.

Superior Damping Factor
The damping factor of an amplifier is crucial for controlling speaker motion, especially at low frequencies. The ATI 10000+ boasts a damping factor of >2000 at 8 Ω and 1 kHz, allowing for precise control over the speakers and resulting in tighter, more accurate bass response.

Versatile Connectivity
Connectivity is key in any professional audio setup, and the ATI 10000+ does not disappoint. Each channel is equipped with 3-pin XLR input connectors that are electronically balanced, ensuring optimal signal integrity. Additionally, the amplifier features XLR, 3-pin male link connectors for easy daisy-chaining of multiple units. The output sockets are SpeakOn connectors (NEUTRIK), providing secure and reliable connections to your speakers.

Advanced Protection Features
The ATI 10000+ amplifier is designed with comprehensive protection features to safeguard your investment. It includes protection against short circuits, open circuits, overheating, overload, DC faults, and supersonic frequencies. These advanced protection mechanisms ensure that the amplifier remains reliable and functional even in adverse conditions.

Technical Specifications at a Glance

• Model Name: ATI 10000+
• Output Circuit: Class TD
• Input Impedance: 20 KΩ balanced, 10 KΩ unbalanced
• Power Requirement: 200-240V, 50-60 Hz
• Transportation Dimension: 69.5 x 54 x 24.5 cm
• Net Weight: 46 kg
• Gross Weight: 50 kg

Conclusion
The ATI 10000+ amplifier is a testament to advanced engineering and superior sound quality. Its impressive power output, pristine audio reproduction, and robust design make it an essential component for any professional audio setup. Whether you’re outfitting a large concert hall, a nightclub, or any venue requiring high-power amplification, the ATI 10000+ is your go-to solution for reliable and exceptional sound performance.
Upgrade your audio system with the ATI 10000+ amplifier and experience the power and clarity that only ATI can deliver.